10GIGABIT ETHERNET UX11I V1 DRIVER

If you are using Jumbo Ethernet frames, ensure that:. All of the currently used networking drivers are included in the latest quarterly HP-UX update. Obtain the PPA number of the card by entering nwmgr. To verify the configuration, use the netstat command to display the current routing table. The interface will be configured for Jumbo Frame operation, which will be retained across reboots. The following load balancing algorithms are supported:

Uploader:	Dogul
Date Added:	25 September 2013
File Size:	33.11 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	61266
Price:	Free* [*Free Regsitration Required]

10GigEthr-00 (ixgbe) 10 Gigabit Ethernet Driver for HP-UX

This powerful feature uxx11i also determine which links go to the same or different Fast and Gigabit Ethernet switches and can assign compatible links to the appropriate trunks. Each time you run the command pair, the values for Ipkts and Opkts should increase.

To verify the current version of fiberchannel drivers, you need to check the software bundle that is installed as well as the version of the drives that is attached to the card. To load a specific bundle:.

How can I tell if the driver is in the kernel? This load balancing is applicable only to outbound traffic.

The system maintains a dynamic routing table in memory. To resolve host names, use the domain name service DNS. Test the card and link with nwmgras follows: This is the recommended load balancing algorithm.

ethernet - svcadm enable ethernet: net gear ethernet drivers

Automatically done by start-up script. To use Jumbo Frames with the iether and igelan drivers, set the MTU value to a number in the range to bytes. ADA 11i v2 and v3 only: The following load balancing algorithms are supported: Please read your switch documentation to know the support status. A Note window opens.

This algorithm uses the least significant bytes of the source and destination IP addresses of the data flow as an index into a table of possible entries. In order for your local network to reach other networks, your machine 10bigabit access to a router or switch devices that route data to other networks.

Quickspecs HP Auto Port Aggregation

Always verify that the switch setting is the recommended one used across your site such as FD. Retrieved from " http: Optional Select Preview to see the commands that will be executed. Assign IP addresses and subnet masks to additional cards as desired options given later. Run the swinstall command.

How to install gigabit ethernet drivers

Click OK when the Status field displays Ready. You can either load the entire HP-UX 11i v3 operating environment OE from the distribution media and you will automatically get the correct LAN and if applicable, mass storage software bundles, or you can select and load the software bundle or bundles required for your card.

If setting up network services: Optionally, if you want to verify that the driver appears for each installed card, enter:.

The server traffic load is distributed over each 10gugabit of the link aggregate so that each individual link is used. To verify link-level connectivity with a remote system, enter: This should get the system up and connected to any local networks. In such a c1, customers can aggregate 4 links of 10GigE capacity each to service his requirements. In this configuration, all the links of the link aggregate can carry traffic i. The interface details are displayed below the list.

If you are using Jumbo Ethernet frames, ensure that: The drivers are also available on the web. Sep 5 ,